CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   ICEM CFD Prism Mesh Generation Problem with Ansys 12.0 & windows 7 OS (http://www.cfd-online.com/Forums/ansys-meshing/84467-icem-cfd-prism-mesh-generation-problem-ansys-12-0-windows-7-os.html)

kh_thakor January 31, 2011 05:02

ICEM CFD Prism Mesh Generation Problem with Ansys 12.0 & windows 7 OS
 
Thanks in Advance , I have problem to generate Prism layer after volume mesh generated , software giving error of prism.exe in my system with Ansys 12.0 & Operating system Windows 7.
The same layer can be generated with Ansys 12.0 & windows XP system.
Is there any probelm due to Operating system or may be error in installation of software ???

PSYMN February 1, 2011 21:22

While it is true that Version 12.0 was released before and therefore never tested on Windows 7, if you get the same problem with XP, it is probably not an OS issue.

But without any more info about the setup or the error, I can't really help.


All times are GMT -4. The time now is 10:34.