CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] split (http://www.cfd-online.com/Forums/ansys-meshing/84602-split.html)

code_source February 3, 2011 10:12

split
 
Hello
I work with DesignModeler for a short time and a look for "split" feature. Where can i find it?

Thank you in advance
(i want to split a face by another face)

jpo April 29, 2011 16:26

excellent question, I am trying to do the same

zxin May 12, 2011 08:05

You can try a command 'slice' .

jpo May 12, 2011 09:31

slice how?

sac May 13, 2011 04:26

Hi,

This is all in the documentation - which should be the first place you look for an answer.

First go tools -> Freeze to freeze your bodies

Then go to the create -> Slice menu.

Try using slice by surface.

jpo May 13, 2011 07:33

Thank you for your reply :)

I looked in the help many times, don't understand anything :(

How does one create a standalone face? I need it as a slicing tool

saeed2294 August 4, 2016 07:47

Split Volume
 
Hello.
I want to model PCM by fluent so i need to create multi zones. i want to model my project by Ansys workbench not by Gambit.my question is how workbench can split volumes as like as Gambit,(i mean Design modeler)?
as you know Gambit have split volume but i cant find it in Ansys workbench.
Thank you.

Kapi August 10, 2016 02:31

slice your volume,

go to help section look it up and do some tutorials

saeed2294 August 15, 2016 03:03

Hi.thanks for your answer..shall i ask you to explain more?
it is about two weeks i work on it and i cant find any solution.

jumaah August 15, 2016 19:00

split surface and slice body
 
to split the surface of geometry
1- select the surface then create a new plane
2- create a line that demarcate your division, on generated plane
3- tools / face split
target face : select the required face
tool geometry : points on the line
4 - generate

to slice body into parts by sketch
1- create sketch in a new plane
2- extrude that sketch by choosing : slice material

or you can slice the body into parts using planes

I hope this will help
jumaah

saeed2294 August 17, 2016 02:24

Hello.
thanks for your answer.


All times are GMT -4. The time now is 04:55.