CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Creating mesh regions in ANYS Meshing (http://www.cfd-online.com/Forums/ansys-meshing/85530-creating-mesh-regions-anys-meshing.html)

Tarjei February 28, 2011 13:32

Creating mesh regions in ANYS Meshing
 
1 Attachment(s)
Hi!

I have a very simple 3D rectangular channel with an increase in cross-sectional area. When I drawed the channel in DesignModeler it consists of two parts, the narrow region and the wider region. My problem is that when I want to mesh the channel, the two regions that I initially wanted is merged to one (body). I want the two regions to mesh intependently (two regions), and of course be connected. This is because I want to decrease the nodal distance towards the area increase. This is a simple task in Gambit, and should be easy in Meshing but I can't figure it out! So if someone have a clue, please help me:) I'll attach a picture of the channel..


All times are GMT -4. The time now is 07:23.