CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Export icem-cfd mesh to ansys (http://www.cfd-online.com/Forums/ansys-meshing/86030-export-icem-cfd-mesh-ansys.html)

adam2008 March 12, 2011 12:11

Export icem-cfd mesh to ansys
 
Hi,
I generated a tets mesh in icem-cfd and try to export the mesh data to ansys for structural analysis purpose. I want to export as solid 92 type element. However, no matter what I do (changing setting in Edit Parameter), icem-cfd always exports solid 45 element or even exports only node coordinates without element information. What should I do? Can icem-cfd export tets mesh as solid 92 type element to Ansys? or can I do something in Ansys to convert it?

Thanks a lot

Ludvik March 15, 2011 05:12

Output > Solver Setup: ANSYS > Edit Parameters > Defaults for high order structural 3D elements.
Push green square belong "Element Type" and choose "Solid Tetra 92".


All times are GMT -4. The time now is 23:45.