CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

FSI grid

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   March 30, 2011, 17:49
Default FSI grid
  #1
New Member
 
Join Date: Jul 2010
Posts: 20
Rep Power: 7
solimcfd is on a distinguished road
Hi, I haven't been using ICEM for all that long. Basically I have a tank of water with a structure located near the bottom that should be immersed from all sides in the fluid. Up till now I have been only modelling the tank with no structure using blocking and hex elements, but now with the added structure I just don't know how to go about creating this mesh. Can I use my old mesh with only fluid and just delete the cells where my structure is?
solimcfd is offline   Reply With Quote

Old   April 2, 2011, 10:26
Default
  #2
Senior Member
 
PSYMN's Avatar
 
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,662
Blog Entries: 1
Rep Power: 36
PSYMN has a spectacular aura aboutPSYMN has a spectacular aura about
If you are doing FSI, then you will need the cells in the structure... (can't just delete them)

Depending on the topology, you can split (the blocking) the solid portion out of the fluid portion and just assign those blocks to a solid material.
__________________
-----------------------------------------
Please help guide development at ANSYS by filling in these surveys

Public ANSYS ICEM CFD Users Survey

This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)...

CFD Online Users Survey
PSYMN is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
MapFields to New Grid For Extreme Grid Deformations due to Body Motion albcem OpenFOAM 0 May 5, 2009 14:17
how to extend FSI 2D codes to 3D, need advises abouziar Main CFD Forum 1 May 30, 2008 04:08
GRID TO GRID INTERPOLATION in FLUENT calogero FLUENT 3 June 4, 2003 08:32
Combustion Convergence problems Art Stretton Phoenics 5 April 2, 2002 05:59
Troubles modelling flow through a grid Hans Klaufus CFX 1 June 28, 2000 16:43


All times are GMT -4. The time now is 21:46.