CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Grid Topology Around Slender Bodies (http://www.cfd-online.com/Forums/ansys-meshing/88235-grid-topology-around-slender-bodies.html)

inmyth May 11, 2011 18:03

Grid Topology Around Slender Bodies
 
1 Attachment(s)
I'm required to come up with a few block topologies around a tangent ogive and other sharp nosed configurations for missiles and slender bodies.

I'm not sure if this is the right place to post.

So far I can only think of one way to create 3D hexa blocks around a tangent ogive - is there anywhere I can find help regarding different topologies? I'm finding it difficult to visualise apart from what I have already thought of.

I've provided a picture of the topology I have already considered. Does anyone have ideas of any other blocking configurations to go around a tangent ogive? I would really appreciate it.

jeevankumarb May 12, 2011 03:56

For this geometry a Perfect one will be C topology, which you have already achived. You can try other O or a H topology. But i think a C will give best results for your geometry.


All times are GMT -4. The time now is 18:13.