CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Angle problems jet imipngement problem ICEM (http://www.cfd-online.com/Forums/ansys-meshing/88649-angle-problems-jet-imipngement-problem-icem.html)

rskrishna87 May 23, 2011 05:21

Angle problems jet imipngement problem ICEM
 
Hi,

i have an impingement cooling structure with cavity and when i am meshing it i am getting a problem with the angle and i am not able to figure out why we are getting it and also near the cavity because of the geometry we have a problem

I have also attached the meshing file of mine.
Please have a look at it and hopefully help me to figure out the problem

Thanks,

Krishna

jeevankumarb May 24, 2011 06:43

Hello,

There is no attachement of the in your post, mostly you forgot to attach.

rskrishna87 May 24, 2011 15:01

yup,

thanks for noticing...But anywayz i solved the problem. It some basic problem of association.


All times are GMT -4. The time now is 15:39.