CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   Error gambit mesh (http://www.cfd-online.com/Forums/ansys-meshing/88703-error-gambit-mesh.html)

stage81 May 24, 2011 05:57

Error gambit mesh
 
Hi,
when I create a geometry on GAMBIT I can not export the grid I get this error message:

"No entities were found for mesh export.
Errors were found during export, Export file was not created"

anyone have a idea!:!

-mAx- May 25, 2011 01:04

did you meshed your domain?

stage81 May 25, 2011 02:52

When i mesh the "face" i receve the error message !!!



Quote:

Originally Posted by -mAx- (Post 309120)
did you meshed your domain?


-mAx- May 25, 2011 02:54

and your domain is 2d or 3d?

stage81 May 25, 2011 04:22

My domain is 3D,
thanks


Quote:

Originally Posted by -mAx- (Post 309138)
and your domain is 2d or 3d?


-mAx- May 25, 2011 04:27

then gambit waits for a 3d mesh (eg: a volume).
If you want to work with 2d, then your surface has to be planar, and has to belong to (xy) plane

stage81 May 25, 2011 04:39

ah ok, thanks for this information..I now why i can"t registre my mesh, i have a problem in my graphics card!! then I don't know how I will cope!!
i want just meshed i 3d brick!!


Quote:

Originally Posted by -mAx- (Post 309146)
then gambit waits for a 3d mesh (eg: a volume).
If you want to work with 2d, then your surface has to be planar, and has to belong to (xy) plane


-mAx- May 25, 2011 04:44

quit your session
create a new one.
Create a brick (volume)
mesh the volume directly (don't mesh surfaces) and export.
Shouldn't be any problem

stage81 May 25, 2011 05:12

...Thanks...

Quote:

Originally Posted by -mAx- (Post 309150)
quit your session
create a new one.
Create a brick (volume)
mesh the volume directly (don't mesh surfaces) and export.
Shouldn't be any problem



All times are GMT -4. The time now is 00:11.