CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   3D Mesh for the Sandia D-Flame (http://www.cfd-online.com/Forums/ansys-meshing/89100-3d-mesh-sandia-d-flame.html)

buxtsued June 4, 2011 07:59

3D Mesh for the Sandia D-Flame
 
1 Attachment(s)
Hello,
i have to generate a 3D mesh in ANSYS FLUENT 13.0 in order to simulate the sandia D flame for my bachelor thesis (i have got already a tutorial for this flame even with a mesh, but only for the 2D case--->see picture as attachment), but have no idea how i should to proceed for the 3D-case. :( It should be a 3D space above the axisymmetric burner with a certain diameter, surrounded by a burnt pilot annulus with a certain outer diameter, as well. My supervisor said it should be an uncertain periodic (and/or symmetric) space above the burners....i already have read the userguide, but still don't know how exactly to proceed. Does anybody know how to do this??? Thx in advance


All times are GMT -4. The time now is 05:36.