[cgriffin33]

I have found a great thread on the workarounds needed to install Ansys Workbench in Ubuntu, but I do not use the workbench and only use Fluent and ICEMCFD as standalones. It is simple enough to install both products, the only error I get is during install of ICEMCFD:

ANSYS installation: Fri Jun 3 16:34:14 2011
Revision: 13.0

[: 340: /ansys_inc/v130/aisol/dll/linx64/libans.common.clrhostmonou.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/libans.common.controlsu.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/libans.graphics.controlsu.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/libans.graphics.graphutilityu.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator
[: 340: /ansys_inc/v130/aisol/dll/linx64/*ud.so: unexpected operator

The real problem occurs when I start ICEM (FLUENT works fine). It will appear to be opening and I will even see the GUI for ICEM, but a dialog box opens with the following error:

segmentation violation - exiting after doing an emergency save

And the only option is to click OK, which shuts down ICEM. The following is printed to my terminal window while ICEM is loading:

ICEM_ACN is /usr/ansys_inc/v130/icemcfd/linux64_amd
ANSYSLIC_DIR is set to /usr/ansys_inc/shared_files/licensing
args
Missing font family helvetica
Window information: depth = 24
class = 4
visual depth = 24 class = 4
can't load font screen14, using variable
Signal 11 caught!
segmentation violation - exiting after doing an emergency save
Exiting...

Any help on what may be a solution to fix this would be greatly appreciated. So far, ICEM is the only thing keeping me attached to my Windows machine.

[PSYMN]

Ubuntu Linux is not officially supported. This means we don't test on this platform and don't fix issues specific to this platform. I have heard of people making it work, but not officially (and I don't recall what they did)...

We support RedHat and Suse officially.

You might find other threads on CFD-Online where this was already discussed and may even fine a solution to make it work.

Best regards,

Simon

[cgriffin33]

I know ubuntu is not supported by ansys, that's why I posted in the forum and didn't bother with ansys support. I am just hoping someone had a similar situation and found a solution.

[eysteinn]

Did you manage to fix this.
I have two computers with ubuntu 11.04.
Icem works fine on the one that I updated from 10.10 but not on a newly installed one and I'm not sure what I did with the other one that made it work

Best regards,
Eysteinn

[eysteinn]

Well seems to work now after a restart. Not sure what fixed it.
Possibly installing libmotif4
and then
sudo ln -s /usr/lib/libXm.so.4 /usr/lib/libXm.so.3

and restarting.

[brahim]

Hi all
I have the same problem as described by cgriffin33.
It seems that ICEM is running when I change the display options from "native" to "X11". The problem then is that the graphics are very slow....
Any help or hints are very welcome!

Best Regards - Brahim.

[bigphil]

Originally Posted by cgriffin33

ICEM_ACN is /usr/ansys_inc/v130/icemcfd/linux64_amd
ANSYSLIC_DIR is set to /usr/ansys_inc/shared_files/licensing
args
Missing font family helvetica
Window information: depth = 24
class = 4
visual depth = 24 class = 4
can't load font screen14, using variable
Signal 11 caught!
segmentation violation - exiting after doing an emergency save
Exiting...

Hi,

I also received the above error on my fresh install of ICEM on my OpenSUSE 11.4 (virtual machine).
I turned off 3D Graphics in the display settings of the virtual machine (virtualBox) and now it opens fine.

Hope it helps somebody,
Philip

[cgriffin33]

Just wanted to let everyone know I was able to get ICEM running in ubuntu 10.04. I did as eysteinn recommended and installed libmotif3 and I also had to install the cshell, just bash would not work. After that it works fine. Thanks for the help.

[Jonathan]

Hi,

Just thought I would share the fix for this.

I ran a clean install of Ubuntu 11.04 and found I could only run ICEM in X11, where as mentioned above, the display was not great + slow. I got the segmentation error and helvetica font msg when running in the NATIVE graphics environment.

Anyway, our linux administrator isolated the problem - it seems the fix is to install the xfonts-75dpi and xfonts-100dpi libraries which are not included in the 11.04 distro, but seem to be present if you upgrade from one of the earlier distributions (10.10 etc).

Anyway, all is working great / as it should, so hope this helps any other ubuntu users ...

cheers
jonathan

[ginggs]

Originally Posted by cgriffin33

ICEM_ACN is /usr/ansys_inc/v130/icemcfd/linux64_amd
ANSYSLIC_DIR is set to /usr/ansys_inc/shared_files/licensing
args
Missing font family helvetica
Window information: depth = 24
class = 4
visual depth = 24 class = 4
can't load font screen14, using variable
Signal 11 caught!
segmentation violation - exiting after doing an emergency save
Exiting...

Icemcfd crashes because of the missing font.

To fix:

sudo apt-get install xfonts-75dpi xfonts-100dpi

Then restart X or reboot your machine in order for the changes to take effect.

[cgriffin33]

Thanks for these fixes.