CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Growing prism mesh without volume mesh and with a symmetry plane (http://www.cfd-online.com/Forums/ansys-meshing/89478-icem-growing-prism-mesh-without-volume-mesh-symmetry-plane.html)

adenlan June 14, 2011 03:53

[ICEM] Growing prism mesh without volume mesh and with a symmetry plane
 
1 Attachment(s)
Hello everybody,

I am struggling with quite the issue here. Indeed, I have a cylinder to mesh but the fluid domain has a symmetry plane that cut the cylinder in two in the axis direction, that is my domain comprises half a cylinder, stuck to a symmetry plane , an inlet and an outlet and wall around.
I have a surface mesh with quad on the cylindrical side and tri in other surfaces. Problem is I cannot grow prism from this mesh !

1) Even if I manage to do a volume mesh the prism failed
2) Without volume mesh, the prism also failed

Does anyone have an idea on how to make this work ?


All times are GMT -4. The time now is 21:54.