CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Growing prism mesh without volume mesh and with a symmetry plane

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 14, 2011, 04:53
Default [ICEM] Growing prism mesh without volume mesh and with a symmetry plane
  #1
New Member
 
Join Date: Aug 2010
Posts: 7
Rep Power: 15
adenlan is on a distinguished road
Hello everybody,

I am struggling with quite the issue here. Indeed, I have a cylinder to mesh but the fluid domain has a symmetry plane that cut the cylinder in two in the axis direction, that is my domain comprises half a cylinder, stuck to a symmetry plane , an inlet and an outlet and wall around.
I have a surface mesh with quad on the cylindrical side and tri in other surfaces. Problem is I cannot grow prism from this mesh !

1) Even if I manage to do a volume mesh the prism failed
2) Without volume mesh, the prism also failed

Does anyone have an idea on how to make this work ?
Attached Images
File Type: png halfcylinder.png (23.7 KB, 18 views)
adenlan is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On



All times are GMT -4. The time now is 05:05.