CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] cubes on block edges (http://www.cfd-online.com/Forums/ansys-meshing/89780-cubes-block-edges.html)

murx June 22, 2011 07:14

cubes on block edges
 
PROBLEM SOLVED
----------------------
Hi,
I have a distorted mesh which is caused by cubes on the block edges shown in the picture below. I assume that these cubes are relics of a split block that I re-merged. I have tried a lot to get rid of the cubes but nothing worked. Can anybody tell me what exactly they represent and how to delete them?

Thanks!

Some more info:
- they seem to be part of the edges - if i disable edges in the display tree, they disappear
- the lines between the cubes are separate edges although those edges are only separated by the cubes, not by vertices

http://img94.imageshack.us/img94/874/cubesi.jpg

murx June 22, 2011 07:33

Figured it out:
Edit Edge --> Unsplit Edge


All times are GMT -4. The time now is 13:15.