|
[Sponsors] |
June 25, 2011, 08:01 |
Extrude 2d tetra mesh
|
#1 |
New Member
Join Date: May 2011
Posts: 6
Rep Power: 14 |
Hello, could anybody help me with that? I need to solve a 2d problem on CFX then I have created a 2d mesh on Icem and I know that I have to extrude it, but my question is, I have to extrude also de geometry? or only the mesh, because I need to apply the boundary condition over geometry entities I think, am I right? Thank you.
|
|
June 28, 2011, 13:18 |
|
#2 |
Senior Member
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47 |
The CFX solver only cares about the mesh... The geometry is not even exported.
The 2D boundaries (curves) will result in line elements around the perimeter... When you extrude, these become shell elements that CFX can apply bocos on... The alternative (my preference) is to just export the 2D model without extruding. Export it to Fluent format (*.msh) and then import that into CFX. CFX will recognize the 2D Fluent file and extrude things its self... Note: the line elements are still important because they become the boundaries, so set that up correctly (inlet, outlet, etc) in ICEM CFD before you mesh...
__________________
----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 06:41 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
[ICEM] How to make Pereodic Tetra mesh? | ale-kc | ANSYS Meshing & Geometry | 6 | November 15, 2010 14:23 |
Extrude mesh in ICEM CFD | Susan | CFX | 2 | November 5, 2007 17:10 |
How to extrude 2D Mesh in ICEM CFD? | VSB | CFX | 7 | December 27, 2006 11:58 |