CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Meshing of tube bundle (http://www.cfd-online.com/Forums/ansys-meshing/89922-meshing-tube-bundle.html)

hassaan June 26, 2011 02:01

Meshing of tube bundle
 
Hello!

I am trying to mesh a tube bundle for a heat exchanger in ANSYS Workbench 12. A straight tube with no bends is easily meshed while one with 180 degree bends is not meshed and gives an error.

Is there a different way to go about this for a tube with bends? Plus i am using the automatic meshing feature.

Thanks in advance! :)

PSYMN June 28, 2011 13:42

Try the "sweep" method and select the source and target... It should be able to handle it.


All times are GMT -4. The time now is 01:50.