CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Inflation conflict betwee Automatic Meshed Body and Sweep Meshed Body (http://www.cfd-online.com/Forums/ansys-meshing/89930-inflation-conflict-betwee-automatic-meshed-body-sweep-meshed-body.html)

PvS June 26, 2011 11:26

Inflation conflict betwee Automatic Meshed Body and Sweep Meshed Body
 
1 Attachment(s)
Dear all,

I have meshed one body with sweep meshing the other with Automatic meshing which is tetrahdron patch conforming, however the inflation for both are different and conflict, what would you suggest?


Thank you in advance

PvS June 26, 2011 12:29

Quote:

Originally Posted by PvS (Post 313637)
Dear all,

I have meshed one body with sweep meshing the other with Automatic meshing which is tetrahdron patch conforming, however the inflation for both are different and conflict, what would you suggest?


Thank you in advance


As it can be seen in the picture the Circular Region inflation confilicts with Rectangular region inflation

PvS June 26, 2011 14:22

Quote:

Originally Posted by PvS (Post 313637)
Dear all,

I have meshed one body with sweep meshing the other with Automatic meshing which is tetrahdron patch conforming, however the inflation for both are different and conflict, what would you suggest?


Thank you in advance


I think my problem is solved..The way I have sliced it is caused conflicting inflation... at the aboved senario Im not sure what to but the problem I had was solved by slicing it differently from the above


All times are GMT -4. The time now is 22:43.