CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] unstructured mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   July 1, 2011, 03:44
Default [ Gambit problem] unstructured mesh
  #1
New Member
 
satyendra
Join Date: Jun 2010
Posts: 15
Rep Power: 7
satyendra is on a distinguished road
hi all,

please tell me how to change the meshing ( see attached pic.) so that all the lines along X or Y axis in the mesh become parallel to each other , so that i can get a structured mesh. I have already hard linked parallel edges to each other before grading, with successive ratio as 1.

satyendra
Attached Images
File Type: jpg Screenshot.jpg (86.3 KB, 28 views)

Last edited by satyendra; July 2, 2011 at 04:07.
satyendra is offline   Reply With Quote

Old   July 1, 2011, 07:44
Default
  #2
Member
 
Adrien Lemoine
Join Date: Jun 2011
Location: Paris,France
Posts: 31
Rep Power: 6
AdrienL is on a distinguished road
Hi,

hope this picture will help you modify your mesh.
(in black the line that will help you build your geometry)
Attached Images
File Type: jpg Sans titre.jpg (36.9 KB, 16 views)
__________________
-------------------------------------------
Plz add reputation if the answer is correct

A cur vaillant rien d'impossible
------------------------------------------
AdrienL is offline   Reply With Quote

Old   July 2, 2011, 01:12
Default
  #3
New Member
 
satyendra
Join Date: Jun 2010
Posts: 15
Rep Power: 7
satyendra is on a distinguished road
Quote:
Originally Posted by AdrienL View Post
Hi,

hope this picture will help you modify your mesh.
(in black the line that will help you build your geometry)
hi AdrienL,

i couldn't get you.

My requirement is i want all the lines along X axis as parallel to each other and similarly for the lines along Y axis so that i can have an structured mesh. For that I have divided all the sides of the outer box into three segments, so that the middle segment of each side is of exactly the same length as the corresponding side of the inner box (Please see the picture attached in my last post). Then while meshing i have ensured that the number of nodes ( successive ratio = 1) in the middle segment of outer box is same as corresponding side of inner box expecting that the mesh will automatically align the corresponding nodes such that all the lines along X or Y axis are parallel to each other. But as you can see in the picture that they are not.

Hope i have explained my problem clearly. Can you please elaborate the solution a little more, since i am new to Gambit.

thanks,
satyendra
satyendra is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2D unstructured mesh majidhojjat OpenFOAM Meshing & Mesh Conversion 1 May 14, 2009 17:09
Structured and Unstructured mesh Jingwei FLUENT 0 March 2, 2009 22:29
Problem with solving for unstructured mesh evgenii OpenFOAM Running, Solving & CFD 5 November 27, 2006 05:37
Unstructured hex mesh lr103476 OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 12 November 24, 2006 06:56
2D Modelling using unstructured mesh Yingchun CFX 8 December 12, 2005 07:05


All times are GMT -4. The time now is 18:59.