CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   mesh around iregular shape (http://www.cfd-online.com/Forums/ansys-meshing/90459-mesh-around-iregular-shape.html)

Centurion2011 July 11, 2011 04:46

mesh around iregular shape
 
what is the best way to mesh space around irregular shape, such as shown in figure below...

http://imageshack.us/photo/my-images...board01pr.jpg/

Centurion2011 July 11, 2011 06:59

http://imageshack.us/f/402/mesho.jpg/

This forum sucks.

jchawner July 16, 2011 16:11

Centurion:

Sorry your experience with this forum has been poor. I looked at your pictures and it seems like you already have a mesh around the irregular shape. So one might say the best way is to use the mesh you have. But I guess you could also be asking about mesh types (triangles, unstructured quads, mapped quads). Or you could also be asking about which buttons to push in the software to make it happen.

I hope eventually you get your answer.


All times are GMT -4. The time now is 10:05.