CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Meshing O-grid question (http://www.cfd-online.com/Forums/ansys-meshing/90507-meshing-o-grid-question.html)

leekj92 July 12, 2011 13:40

Meshing O-grid question
 
1 Attachment(s)
Hi everyone,
I've been trying to mesh the figure attached for a while now, but my blocking strategy doesn't seem to work. For some reason, ICEM is not letting me create an ogrid through the entire pipe minus the block that defines the smaller pipe going through the overall pipe. Any suggestions on the blocking strategy of the figure?

thank you!

arunkumarnd July 13, 2011 01:24

u just create the parts of block live which u want and dead that u want to delete or minus, then it will b easy to make o grid just by giving name of the part ...try like that

arunkumarnd July 13, 2011 01:26

or u mail me the file u blocked ..i will try :)..ID arunkumarnd@gmail.com

leekj92 July 13, 2011 09:56

thank you!
I sent you an email with the attachment.


All times are GMT -4. The time now is 21:45.