[ICEM] Meshing O-grid question

leekj92 · July 12, 2011, 13:40

Hi everyone,
I've been trying to mesh the figure attached for a while now, but my blocking strategy doesn't seem to work. For some reason, ICEM is not letting me create an ogrid through the entire pipe minus the block that defines the smaller pipe going through the overall pipe. Any suggestions on the blocking strategy of the figure?

thank you!

arunkumarnd · July 13, 2011, 01:24

u just create the parts of block live which u want and dead that u want to delete or minus, then it will b easy to make o grid just by giving name of the part ...try like that

arunkumarnd · July 13, 2011, 01:26

or u mail me the file u blocked ..i will try

..ID arunkumarnd@gmail.com

leekj92 · July 13, 2011, 09:56

thank you!
I sent you an email with the attachment.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
On grid independent solution for pulsatile flow	David	FLUENT	5	March 25, 2022 03:33
2d irregular grid	Remy	Main CFD Forum	1	December 22, 2008 04:49
Moving Body Grid Question	Matt	Main CFD Forum	5	September 13, 2004 00:45
Combustion Convergence problems	Art Stretton	Phoenics	5	April 2, 2002 05:59
Grid Quality and the Solution	Faraz	Main CFD Forum	4	January 10, 2000 18:18

July 13, 2011, 01:24		#2
arunkumarnd New Member Arunkumar N D Join Date: Dec 2010 Posts: 9 Rep Power: 15	u just create the parts of block live which u want and dead that u want to delete or minus, then it will b easy to make o grid just by giving name of the part ...try like that

July 13, 2011, 01:26		#3
arunkumarnd New Member Arunkumar N D Join Date: Dec 2010 Posts: 9 Rep Power: 15	or u mail me the file u blocked ..i will try ..ID arunkumarnd@gmail.com

July 13, 2011, 09:56		#4
leekj92 New Member KJ Lee Join Date: May 2011 Posts: 15 Rep Power: 14	thank you! I sent you an email with the attachment.