CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

Gambit Designing Problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   August 1, 2011, 08:09
Post Gambit Designing Problem
  #1
New Member
 
sumit singh
Join Date: Aug 2011
Posts: 8
Rep Power: 6
sumit singh is on a distinguished road
hi
I am designing a cylinder say with 400mm height and 40mm radius in gambit. Now i want to use particular portion of wall say 200 mm from the centre to coat some material on that portion only. how can i separately use that portion of wall from the volume.
please suggest any solution
mail me at
sumit_nitj@yahoo.com
Attached Images
File Type: jpg 1.jpg (53.2 KB, 8 views)

Last edited by sumit singh; August 2, 2011 at 04:59. Reason: to attach drawing
sumit singh is offline   Reply With Quote

Old   August 2, 2011, 01:08
Default
  #2
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,992
Rep Power: 30
-mAx- will become famous soon enough
post a sketch
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Old   August 2, 2011, 05:03
Default
  #3
New Member
 
sumit singh
Join Date: Aug 2011
Posts: 8
Rep Power: 6
sumit singh is on a distinguished road
i have put the drawing. i want to use the 200mm height(as marked in drawing) cylinder for coating some paints on it inside a 500mm height cylinder.so it must be like a wall inside a volume. now how to separate this portion as a wall from the volume so that i can coat the paint.
i don't want that part to be a separate volume.
sumit singh is offline   Reply With Quote

Old   August 2, 2011, 05:11
Default
  #4
Super Moderator
 
-mAx-'s Avatar
 
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 2,992
Rep Power: 30
-mAx- will become famous soon enough
create your wall as surface, and split your volume with this surface.
In the BC panel, assign your surface as wall.
If you don't do it, Gambit will define it automatically as interior
__________________
In memory of my friend Hervé: CFD engineer & freerider
-mAx- is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Gambit geometry problem cestrin FLUENT 3 July 4, 2012 02:33
Problem with Mesh conversion Gambit msh Foam Rachid BANNARI (Bannari) OpenFOAM Other Meshers: ICEM, Star, Ansys, Pointwise, GridPro, Ansa, ... 25 September 11, 2011 07:58
Gambit - meshing over airfoil wrapping (?) problem JFDC FLUENT 1 July 11, 2011 05:59
Gambit installation problem Panos FLUENT 4 March 5, 2009 23:44
Problem importing iges file to Gambit Tassos FLUENT 0 May 7, 2008 04:28


All times are GMT -4. The time now is 04:47.