CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Meshing error from ICEM (http://www.cfd-online.com/Forums/ansys-meshing/91822-meshing-error-icem.html)

NGH August 23, 2011 21:38

Meshing error from ICEM
 
Hi

Im using ICEM to mesh an object. I used blocking for hexa meshing and when I convert the pre-mesh to unstructured mesh, there was no error from ICEM. When I import into FLUENT, it has the following error:

Build grid:abort due to critical error

Building mesh: cell centroid is xc 1215.78 yc=-15.85 zc=-180.79
Warning:no face with given nodes Thread 12 cell 423095

Any advise on how to resolve this error? I check the cell, it doesnt seems wrong.


All times are GMT -4. The time now is 16:12.