CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] minor internal error (http://www.cfd-online.com/Forums/ansys-meshing/91831-icem-minor-internal-error.html)

camoesas August 24, 2011 06:11

[ICEM] minor internal error
 
HI Icem-Users,

I am meshing a quite simple cace in Icem but I get this pacifying error message:

Code:

A minor internal error has occurred.
You may continue to work but if problems arise they may be related to this error.
Try using the check/fix function to fix the problem
The following message was designed to aid developers fix the problem:

error projecting edge 73 to 26

what does this mean?

Thanks

camoesas August 24, 2011 06:22

solved the problem by associating some edges to curves (not all). Donīt know why sometimes I get this message and sometimes not.

BrolY August 24, 2011 08:30

Don't pay attention to those messages.
It doesn't mean your mesh is not correct.

camoesas September 13, 2011 06:13

Ok I wont. thanks for the reply


All times are GMT -4. The time now is 11:07.