CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   getting rid of pyramids from Wake region (http://www.cfd-online.com/Forums/ansys-meshing/91996-getting-rid-pyramids-wake-region.html)

Prakash.Paudel August 29, 2011 21:55

getting rid of pyramids from Wake region
 
1 Attachment(s)
Hi everyone,

First off, thanks everyone here for helping me out with different tips and tricks on mesh generation. I think the the forums here are really great for amateur and professional meshers.

I have one more issue surfacing just after i thought i had everything figured out. The pyramids that connect the prisms ( in wake region) with the fluid region are the lowest quality members of my mesh ( see pic) and i want to improve their quality or get rid of them completely and replace with either tetras or prisms. I would appreciate if anyone could give me some suggestions.

Thanks in advance and good luck in whatever you are working with.

Prakash


All times are GMT -4. The time now is 14:16.