CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] fail to importing parasolid (http://www.cfd-online.com/Forums/ansys-meshing/92565-fail-importing-parasolid.html)

TommyLui September 18, 2011 11:00

fail to importing parasolid
 
Hello everybody. I've currently face a problem in importing the parasolid file which generate by solidwork in to ICEM. The log shows me the following,

child killed: SIGABRT
Tetin file ./Part1.tin does not exist
Done.
Current Coordinate system is global

after this, nogeometry was imported into ICEM.

I don't know what is happening. It is because this is my first time use ICEM in my own laptop. Is it thereis not enough RAM in my computer?Could anyone help me to solve the problem?

PSYMN September 20, 2011 12:41

Sorry, I don't know, but perhaps you could try another parasolid file just to make sure it isn't a model specific problem...?


All times are GMT -4. The time now is 07:09.