CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Copy Blocking and Geomtry with Associations (http://www.cfd-online.com/Forums/ansys-meshing/92937-copy-blocking-geomtry-associations.html)

Mick September 29, 2011 12:37

Copy Blocking and Geomtry with Associations
 
Hi All,

Is there a way to copy the geometry and blocking where the block's associations stick with the copied geometry?

I copied the blocking with the geometry but the blocking was associated to the original geometry as opposed to the copied geometry.

Any help is much appreciated.

Kind Regards,
Michael

BrolY September 30, 2011 03:33

From my experience, this doesn't work very well.
BUt you can try the following option : Blocking -> Blockin Associations -> Update Associations

Mick September 30, 2011 09:53

Problem solved!
 
Hi BrolY,

That worked! Thanks for your help and the quick reply.

When I copied the geometry and blocks updating the associations worked except for one face-surface association but that was easy to fix.

Michael


All times are GMT -4. The time now is 14:01.