CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] merge/virtual topology problem (http://www.cfd-online.com/Forums/ansys-meshing/93901-merge-virtual-topology-problem.html)

firatwsen October 30, 2011 08:21

merge/virtual topology problem
 
Hi

I have a problem with my geometry which I have formed using CATIA v5.

Please imagine my geometry that, there is a body and there are another two

bodies on the first body. So one face of the first body is in contact with

totaly two faces of other two bodies. And I formed one part and three bodies

with these parts.

When I import geometry into design modeller, the face of the first body (in

contact with two faces of other two body), is single (that is no need to

merge).But when ı continue with ansys/meshing, I see that this face (in

contact with two faces of other two body), is divided into two. So I tried to

use virtual face but it gave an error. But as I said first I can not see these

two faces at design modeller (they is on face). So I can not use sweep

method.

What is the problem. Thanks in advanced.

Fırat


All times are GMT -4. The time now is 19:14.