CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Details of Mesh Statistics

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   October 31, 2011, 10:06
Default Details of Mesh Statistics
  #1
New Member
 
Akash
Join Date: Sep 2011
Posts: 12
Rep Power: 5
akash_max is on a distinguished road
Hi All,

Please find the details of the mesh statistic below. I usually get confused with this.
Could any one explain me more on this. By seeing this statistics please let me know what should i do the corrections and how could I improve my mesh using workbench.

I didnt get good convergence with this mesh. It take lot many iterations before it reaches below RMS 1e-05, atleast where I can stop and postprocess my results.

Kindly help me on this

Best Regards
Akash
+--------------------------------------------------------------------+
| Mesh Statistics |
+--------------------------------------------------------------------+
| Domain Name | Orthog. Angle | Exp. Factor | Aspect Ratio |
+----------------------+---------------+--------------+--------------+
| | Minimum [deg] | Maximum | Maximum |
+----------------------+---------------+--------------+--------------+
| Default Domain | 0.8 ! | 1161 ! | 308 OK |
+----------------------+---------------+--------------+--------------+
| | %! %ok %OK | %! %ok %OK | %! %ok %OK |
+----------------------+---------------+--------------+--------------+
| Default Domain | 1 1 98 | <1 2 98 | 0 0 100 |
+----------------------+---------------+--------------+--------------+
akash_max is offline   Reply With Quote

Old   October 31, 2011, 12:08
Default
  #2
Far
Super Moderator
 
Far's Avatar
 
Sijal Ahmed Memon (turboenginner@gmail.com)
Join Date: Mar 2009
Location: Islamabad Pakistan
Posts: 3,916
Blog Entries: 6
Rep Power: 39
Far will become famous soon enoughFar will become famous soon enough
Send a message via Skype™ to Far
1. KEEP the minimum angle greater than 20 (MUST be done)
2. Also take care of expansion factor that is the ratio of two adjacent cells. Should not be greater than 10-20 I guess. Check the CFX help
Far is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] Hexa mesh, curve mesh setup, bunching law Anorky ANSYS Meshing & Geometry 4 November 12, 2014 01:27
Mesh motion with Translation & Rotation Doginal CFX 2 January 12, 2014 07:21
non-smooth mesh Svensson OpenFOAM Native Meshers: snappyHexMesh and Others 11 January 18, 2012 10:13
Printing mesh details jabhiji OpenFOAM 5 June 28, 2011 07:50
How to control Minximum mesh space? hung FLUENT 7 April 18, 2005 09:38


All times are GMT -4. The time now is 22:33.