[ANSYS Meshing] mesh in hollow pipe

murugesanjeyabalan · November 3, 2011, 08:28

hi
how to mesh hollow pipe?

by
j.murugesan

Sushilkumar · November 3, 2011, 08:46

You want to generate the surface mesh only..?

murugesanjeyabalan · November 4, 2011, 02:35

software: ANSYS FLUENT 13.

i need to mesh the working fluid (air) also

by
murugesan.j

Sushilkumar · November 4, 2011, 11:43

You should have a solid volume for the domain you want to mesh. Better you get the solid cylinder generated and then mesh it.

PSYMN · November 4, 2011, 20:45

Even the most basic tutorial should answer this question for you. There are some built into the software and a bunch more on the customer portal.

murugesanjeyabalan · November 5, 2011, 04:18

how to mesh channel (like 'c' type) with working fluid as air in ANSYS WORKBENCH.

BY
J.MURUGESAN

alexsatan · November 11, 2011, 21:24

Quote:

Originally Posted by murugesanjeyabalan

how to mesh channel (like 'c' type) with working fluid as air in ANSYS WORKBENCH.

BY
J.MURUGESAN

Hi :
Just cut your mold will be OK .Enjoy!

BY
Alex

November 3, 2011, 08:28	mesh in hollow pipe	#1
murugesanjeyabalan New Member murugesan Join Date: Aug 2011 Posts: 8 Rep Power: 14	hi how to mesh hollow pipe? by j.murugesan

November 4, 2011, 20:45		#5
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	Even the most basic tutorial should answer this question for you. There are some built into the software and a bunch more on the customer portal. __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] SnappyHexMesh for internal Flow	vishwa	OpenFOAM Meshing & Mesh Conversion	24	June 27, 2016 08:54
Icemcfd 11: Loss of mesh from surface mesh option?	Joe	CFX	2	March 26, 2007 18:10
meshing hollow part of pipe	rai	FLUENT	0	December 19, 2005 00:46
Terrible Mistake In Fluid Dynamics History	Abhi	Main CFD Forum	12	July 8, 2002 09:11
fluid flow fundas	ram	Main CFD Forum	5	June 17, 2000 21:31

November 3, 2011, 08:46		#2
Sushilkumar Member Join Date: Apr 2009 Location: Pune Posts: 37 Rep Power: 17	You want to generate the surface mesh only..?

November 4, 2011, 02:35		#3
murugesanjeyabalan New Member murugesan Join Date: Aug 2011 Posts: 8 Rep Power: 14	software: ANSYS FLUENT 13. i need to mesh the working fluid (air) also by murugesan.j

November 4, 2011, 11:43		#4
Sushilkumar Member Join Date: Apr 2009 Location: Pune Posts: 37 Rep Power: 17	You should have a solid volume for the domain you want to mesh. Better you get the solid cylinder generated and then mesh it.

November 5, 2011, 04:18		#6
murugesanjeyabalan New Member murugesan Join Date: Aug 2011 Posts: 8 Rep Power: 14	how to mesh channel (like 'c' type) with working fluid as air in ANSYS WORKBENCH. BY J.MURUGESAN