CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ICEM] Transformation scale in msh2cdp

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 22, 2011, 07:37
Default Transformation scale in msh2cdp
  #1
New Member
 
Konstantinos
Join Date: Sep 2011
Posts: 11
Rep Power: 14
kostas is on a distinguished road
Hi,
i have a mesh with a computational domain

1<x<1.075 1<y<1.24 1<z<1.12 and i want transform it through msh2cdp.in to
1<y<1.1 1<x 1.03125 1<z<1.0499
basicly, i want to reduce the thickness at each direction by a factor of 0.4166.when i run it,it results to minimum values that start from 0.4166 and thickness equal to the original ones multiplied by 0.4166. also,it returns me a fault,due to not-connected faces,as a result of all of this.can anyone help?
kostas is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbulence length scale and integral length scale rizhang CFX 2 April 22, 2016 08:22
advection time scale Tanveer ahmad Rubani CFX 1 February 24, 2009 17:16
EDC and cell time scale Trine FLUENT 2 May 31, 2007 08:53
scale or full scale justin FLUENT 1 August 4, 2006 23:00
LES inlet length scale f.neilson Main CFD Forum 0 January 31, 2005 14:26


All times are GMT -4. The time now is 01:42.