CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Unable to generate surface mesh for a coil (http://www.cfd-online.com/Forums/ansys-meshing/95023-unable-generate-surface-mesh-coil.html)

pitisrisuk December 2, 2011 12:51

Unable to generate surface mesh for a coil
 
Hi,

I'm using Workbench 11 and trying to mesh a coil with CFX-Mesh. When I click on Generate Surface Mesh, I receive an error message:

Internal Error
Unable to locate containing element for node
Coordinate: 0.0000E+00, 1.5661E+02, 1.3248E+01
Coordinate: 3.3536E+00, 0.0000E+00

If I make a constant edge length smaller or try to refine spacings, it says:

Internal Error
MEM_EXTD storage allocation failed

I'm not sure what these two messages mean. Can anyone explain to me what these mean and how to resolve this issue? I think my geometry is ok.

Thanks,
Piti


All times are GMT -4. The time now is 16:02.