|December 2, 2011, 15:14||
Help varying mesh densities
Join Date: Dec 2011
Posts: 4Rep Power: 5
Hi guys I'm relatively new to CFD, having just started a few months back for a university project.
I'm using ICEM to mesh an aneurysm model and i want to set 2 different mesh densities in 2 different regions (aneurysm body and inlet extension). I set the global max element size to the size i would like in the coarser region (inlet extension) and then set a smaller max size for all parts in the finer region (aneurysm body) using the part mesh set up.
But when the mesh generates, while having the desired density at the surface, it still produces large elements inside the finer aneurysm volume corresponding to the global size, and not the one i set for it in the part mesh set up!
What am i doing wrong??
Thank you for any help you can give
|Thread||Thread Starter||Forum||Replies||Last Post|
|Mesh motion with Translation & Rotation||Doginal||CFX||2||January 12, 2014 07:21|
|2D Mesh Generation Tutorial for GMSH||aeroslacker||Open Source Meshers: Gmsh, Netgen, CGNS, ...||12||January 19, 2012 04:52|
|engrid -> save as .stl with boundarie codes||Zymon||enGrid||31||August 29, 2011 13:40|
|2d irregular grid||Remy||Main CFD Forum||1||December 22, 2008 05:49|
|basic of mesh refinement||arya||CFX||4||June 19, 2007 12:21|