CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Command List / display specific node (http://www.cfd-online.com/Forums/ansys-meshing/95130-command-list-display-specific-node.html)

galap December 7, 2011 05:43

Command List / display specific node
 
Hi guys,

I'm looking for a command list for ICEM. In my case I remember that a specific vertice can be displayed by typing "display node.." or something like that. I forget the correct command and I can't find it in the manual.

Can anyone provide me a list of available commands?

PSYMN December 9, 2011 11:55

Have you checked the programmers guide? Help => Programmer's Guide?

Assuming you have and have also searched for terms like "show" or "list",

and assuming that no one else on CFD-Online can tell you the command,

the next step is to call the ANSYS (ICEM CFD) Hanover Tech support guys. They are really sharp, and if they don't know the answer, they can walk across the hall (literally) and ask a developer.

If it turns out that there is a command that we some how forgot to include in the doc, ask them to ask the developer to add it for the next release.

Best regards,

Simon


All times are GMT -4. The time now is 00:43.