[ICEM] surface mesh does not respect curve spacing

skrzatchlewny · December 13, 2011, 18:59

Dear all,

I have a mesh issue with relative simple geometry. Does anybody know why patch dependent (all tria) mesher does not respect curve spacing?

mesh settings are:
scale factor 1
max element 10
"respect line element" - on
other settings are default

Everytime when i try to mesh the geometry some "points" (that i cannot remove) come up, what are those points?

Regards,
Adam

PSYMN · December 14, 2011, 11:18

You need to "Geometry => Repair => Build Diagnostic Topology" so that the surfaces are associated with the adjacent curves...

skrzatchlewny · December 15, 2011, 16:30

Thank you, problem solved.

December 14, 2011, 11:18		#2
PSYMN Senior Member Simon Pereira Join Date: Mar 2009 Location: Ann Arbor, MI Posts: 2,663 Blog Entries: 1 Rep Power: 47	You need to "Geometry => Repair => Build Diagnostic Topology" so that the surfaces are associated with the adjacent curves... __________________ ----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] Using Surface Mesh from ANSA for Fluent Sim	tommymoose	ANSYS Meshing & Geometry	15	March 3, 2016 17:29
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11
varying curve mesh spacing at icem surface-mesh?	mirko_r	ANSYS Meshing & Geometry	6	January 14, 2010 13:23
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09

December 15, 2011, 16:30		#3
skrzatchlewny New Member Join Date: Nov 2009 Posts: 17 Rep Power: 18	Thank you, problem solved.