CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Micro channel waterblock meshing.

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   January 2, 2012, 10:55
Default Micro channel waterblock meshing.
  #1
New Member
 
hwng
Join Date: Dec 2011
Posts: 2
Rep Power: 0
codenamew is on a distinguished road
Hi,

I would like to ask for advices on how to mesh a micro channel waterblock design in Ansys. I have tried using ANSYS Meshing to mesh the waterblock but end up with the error not enough memory. I used a patch conforming tet method to mesh it. I am afraid that the method that I used is incorrect thus I would like to ask for advice and guidance from the seniors at CFD online. Thanks.
codenamew is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
micro channel heat exchanger design serpil kaya Main CFD Forum 4 August 15, 2013 01:38
3D meshing : open top micro channel quinn ANSYS Meshing & Geometry 0 January 20, 2011 17:11
meshing triangular channel mu FLUENT 3 February 22, 2008 12:31
help with meshing trapezoidal channel rosol FLUENT 0 September 14, 2007 03:26
tetrahedral meshing in square channel Aashutosh Magdum FLUENT 4 May 28, 2005 20:27


All times are GMT -4. The time now is 20:37.