CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ANSYS Meshing] Radial biasing on mapped face mesh (http://www.cfd-online.com/Forums/ansys-meshing/95791-radial-biasing-mapped-face-mesh.html)

siw January 3, 2012 07:24

Radial biasing on mapped face mesh
 
1 Attachment(s)
Hi,

How can the elements be clustered at the inner and outer surfaces in the radial direction of this cylinder mesh in ANSYS Meshing v14? I can only get element biasing along the cylinder length as an option is given in the sweep method.

I cannot use inflation whilst using a sweep method and no other option are given.

Thanks


All times are GMT -4. The time now is 20:16.