|
[Sponsors] |
January 7, 2012, 21:51 |
2D Meshing
|
#1 |
Member
Join Date: Nov 2011
Posts: 42
Rep Power: 14 |
Basically I have been trying to build a geometry within ICEM and mesh it. However when I open the mesh in fluent I get a critical error. ANyway, I'll list the steps I'm doing:
1. Create points 2. Put lines between points 3. Define the body 4. Blocking 5. Associating edges and curves 6. Defining the boundary conditions 6. Creating a pre-mesh. 7. Creating unstructured mesh 8. Creating output file mesh. Am I missing a really important step here? Sorry for being such a nublet. |
|
January 8, 2012, 02:08 |
|
#3 |
Member
Join Date: Nov 2011
Posts: 42
Rep Power: 14 |
The blocking and pre-mesh I've attached. Thanks!
|
|
January 8, 2012, 06:23 |
|
#5 |
Member
Join Date: Nov 2011
Posts: 42
Rep Power: 14 |
hiya! here it is! thanks!
|
|
January 8, 2012, 20:18 |
|
#8 |
Member
Join Date: Nov 2011
Posts: 42
Rep Power: 14 |
Thanks a lot for taking the time to help me with this! Gave me an idea how to set up the geometry. I have done a pre-mesh and the quality has been very good.
Also when opening fluent, do I opt for the 2d dimension to run a 2d simulation? I have never done 2d simulations before so I might be missing very important steps to make it run. Maybe thats why it gives me back "wrong dimensions" error. Again thanks! |
|
January 9, 2012, 19:01 |
|
#11 |
Member
Join Date: Nov 2011
Posts: 42
Rep Power: 14 |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] Migrating from GAMBIT to ANSYS Meshing | David-CFD | ANSYS Meshing & Geometry | 1 | April 1, 2011 05:22 |
Best Meshing scheme for Cylinder | Nutrex | Main CFD Forum | 4 | July 29, 2008 11:03 |
Meshing locks workbench window. | andy2o | CFX | 0 | February 1, 2008 05:01 |
Singularity of grid?Volume meshing vs face meshing | Ken | Main CFD Forum | 0 | September 4, 2003 11:09 |
Volume Meshing & Face Meshing? singularity of grid | ken | FLUENT | 0 | September 4, 2003 11:08 |