|
[Sponsors] |
January 6, 2012, 15:31 |
Creating Block using Extrude Faces
|
#1 |
New Member
talebe
Join Date: Jul 2010
Location: Istanbul
Posts: 8
Rep Power: 15 |
Hi all,
Nowadays , i m trying to mesh pipe line. I'm using two o-grid, and all o-grids edges must be linked main edge associated to curve or surface. blocking.jpg pipe1stblockusinglinkededges.jpg I try to use the extrude faces with using extrude along the curve. thats the problems begun. When i using the option copy projection, all the main edges associated to master block surface. Although there was a some problems i faced problem link edges process, o-grid edges linked to main edges. usingextrusinalongthecurvewithcopyprojection.jpg linkededgeerrors.jpg When i put the option copy projection off, of course there was not any linked edges process. notusingtheoptioncopyprojection.jpg do you have any suggestions how to solve this problem? using copy projection, main edges fail to associate to surface, not using this option i faced o-grid edges not associated. I think to write a script algorithm to do process the "link edges" but clearly i dont have any idea of how vertices numbering. Last edited by alienplanet; January 7, 2012 at 17:40. Reason: uploading clear pictures |
|
January 7, 2012, 17:42 |
|
#2 |
New Member
talebe
Join Date: Jul 2010
Location: Istanbul
Posts: 8
Rep Power: 15 |
topic is updated
|
|
January 8, 2012, 16:30 |
|
#3 |
Senior Member
Simon Pereira
Join Date: Mar 2009
Location: Ann Arbor, MI
Posts: 2,663
Blog Entries: 1
Rep Power: 47 |
Yea, the associations are off. You can update the associations. Or you can just set them up manually... One issue you will have either way is that your edges don't line up to your curves. You may want to adjust the parameters of your extrude so that you have edges lined up with the curves. You may also want to run ISO curves around the bend so you can project your edges to those also...
A side note... Extrude is not the fastest way to handle this model. I would start with a top down blocking of the overall U shape (using a CGrid), then I would delete down to the correct topology. Then I would run an ogrid thru the final blocking. This is actually done as part of the basic training. The U pipe is done during the lecture, the corresponding tutorial is the sphere cube, which is similar.
__________________
----------------------------------------- Please help guide development at ANSYS by filling in these surveys Public ANSYS ICEM CFD Users Survey This second one is more general (Gambit, TGrid and ANSYS Meshing users welcome)... CFD Online Users Survey |
|
January 14, 2012, 02:29 |
|
#4 |
New Member
talebe
Join Date: Jul 2010
Location: Istanbul
Posts: 8
Rep Power: 15 |
Hi Simon,
Ty for you reply, actually this problem ( link edge problem in the o-grid edges) occurs while i m using " copy projection " option off. Because there is no surface or curves to be associated and also first main edges. because of the that problem ( problem that association of link edges with or wtihout using copy projection ) i guess this must be solved by writing a script file. In addition to, for u pipes your advice is quite good for me. I'll try to generate c o-grid meshes. But, further process (link edges of the o-grid edges) doesn't help me. I need to link ogrid edges manually. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
[Gmsh] Cannot get the right mesh from gmsh | JinBiao | OpenFOAM Meshing & Mesh Conversion | 2 | August 31, 2010 04:51 |
[Commercial meshers] Icem Mesh to Foam | jphandrigan | OpenFOAM Meshing & Mesh Conversion | 4 | March 9, 2010 02:58 |
[snappyHexMesh] external flow with snappyHexMesh | chelvistero | OpenFOAM Meshing & Mesh Conversion | 11 | January 15, 2010 19:43 |