|
[Sponsors] |
[Workbench] Workbench (Engineering dara) problem |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 27, 2013, 06:57 |
Workbench (Engineering dara) problem
|
#1 |
Senior Member
Moha
Join Date: Mar 2013
Location: EU
Posts: 103
Rep Power: 0 |
Hi,
I defined enthalpy-temperaure values for a material in "engineering data" but there is sign "?" next to the name of the material. if I put a tik for "suppression" it will ignore the enthalpy then the problem will be solve (does it means, ignoring enthalpy for materials properties ?). regards, |
|
March 30, 2013, 19:10 |
|
#2 |
New Member
Engineer
Join Date: Mar 2013
Posts: 21
Rep Power: 13 |
Question mark appears when you haven't defined a single property. I don't know how you are defining the material but try this.
Either try to duplicate one of the existing material and change its property, or to add a new material all by yourself, Start Engineering Data and click on Engineering Data Icon, (similar to Winrar, you will find it in top panel at right). Now you will see different materials groups pre-defined in workbench. Scroll down to the end and click on Add New and name it, save somewhere. Now DO CHECK THE BOX in front it to make it editable. Now you will be able to add your material. Once done, add which ever property you want to specify and then in the Material Class table, uncheck the box and click on save. |
|
March 31, 2013, 05:59 |
|
#3 |
Senior Member
Moha
Join Date: Mar 2013
Location: EU
Posts: 103
Rep Power: 0 |
thank you very much for reply, done!
|
|
March 31, 2013, 07:33 |
|
#4 |
New Member
Engineer
Join Date: Mar 2013
Posts: 21
Rep Power: 13 |
Glad to hear that.
|
|
February 17, 2017, 02:41 |
engineering data
|
#5 |
New Member
ruthran
Join Date: Feb 2017
Posts: 1
Rep Power: 0 |
i am using ansys 16.2 .i edit endineering data file .i click genaral materials its not display any metals why?
please help me quickly |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
ANSYS Workbench mesh crashes (ANSYSWBU.exe problem) | kondan | ANSYS | 76 | February 22, 2024 02:27 |
[ANSYS Meshing] Problem in updating the mesh in Workbench | victorz | ANSYS Meshing & Geometry | 23 | October 31, 2017 02:52 |
Engineering data (workbench application) to FLUENT | ahvz | FLUENT | 0 | March 29, 2013 10:04 |
Problem of contact on Ansys Workbench 11 | Benjaminleb | ANSYS | 4 | May 28, 2010 02:07 |
Workbench engineering data model | zegtuhetmaar | ANSYS | 0 | February 9, 2010 06:55 |