CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] volume meshing (http://www.cfd-online.com/Forums/ansys-meshing/96953-volume-meshing.html)

lili February 6, 2012 04:53

volume meshing
 
hi
how can I creat fine mesh in a special palce in a volume? I mean in a cylender I want to have fine mesh around a point while coarser mesh in the other places?

-mAx- February 6, 2012 07:55

size function
http://my.fit.edu/itresources/manual...g0502.htm#1755

heidar February 9, 2012 15:54

have a good time
 
Leila

you could go through edge meshing. if you wana fine mesh near your substanece in the cylanr you could increase the number of mesh around the inner sahpe when you are meshin edge.
make coarse mesh around the edge that you want coarse mesh

lili February 13, 2012 12:42

dear Mr. jafarizadeh
thanks alot. but I have a serious problem in modeling a reactive DPM problem in Fluent. do you have ever model a discrete phase problem involved reaction? this is very urgent.


All times are GMT -4. The time now is 13:42.