CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] Setting up boundary conditions in ICEM for CFX-Pre (http://www.cfd-online.com/Forums/ansys-meshing/96984-setting-up-boundary-conditions-icem-cfx-pre.html)

mgu February 6, 2012 15:37

Setting up boundary conditions in ICEM for CFX-Pre
 
I have spent a great deal of time trying to set up bounday conditions in ICEM for my flow domain. I have a hex mesh ready to be exported to CFX-Pre. However, I do not seem to be able to set up boundary conditions in the Family boundary conditions window. Whenever I try to "select a BC type", I get an error message telling me that I have not selected a valid type. Are there types specific to CFX-Pre? The ones I am assigning are inlet, outlet, wall, and sub-domain.

I would appreciate it if anyone could shed some light on the subject. This seems rudimentary, but I could not find anything useful in the ICEm user manual.

Many thanks!

rsyc October 29, 2013 00:06

Hi
I have the same problem, I get the same error message. Could anyone help please?
Thanks

cbaraj October 30, 2013 22:08

I also have the same problem. how did you guys do it?

rsyc October 31, 2013 02:00

Hi cbaraj

I could not do it with ICEM. I just determined my walls, outlets, inlet,... and for the boundary condition I opened the mesh in the CFX-Pre and fixed the boundary condition over there. Sadly I have no idea why family B.C in ICEM did not work.

Hope it helps


All times are GMT -4. The time now is 18:20.