CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > ANSYS Meshing & Geometry

[Other] Mesh from Abaqus to Fluent

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   February 16, 2012, 04:59
Default Mesh from Abaqus to Fluent
  #1
Member
 
felicemastronzo's Avatar
 
Felice
Join Date: Nov 2010
Posts: 43
Rep Power: 6
felicemastronzo is on a distinguished road
Hi guys,

I have created a mesh in Abaqus. In order to have a higher mesh quality, I have partitioned my model. I have than exported the .inp file from Abaqus. If I import that file in Fluent, I'm not able to see the partitions that I have created before in Abaqus. There is a way to give a name to the single partitions in order to have that partitions also in Fluent? I have tried to use the "set" command that I always use to give a name to the boundaries, but after the import I'm able to see only the boundaries names and not the different partitions. In other words, after the import, I have only 1 cell zone.

Regards
F
felicemastronzo is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
No layers in a small gap bobburnquist OpenFOAM Native Meshers: snappyHexMesh and Others 6 August 26, 2015 09:38
[ICEM] export hexa mesh to fluent Wieland ANSYS Meshing & Geometry 37 January 23, 2013 04:27
vtk mesh or Abaqus mesh to OpenFOAM bigphil Open Source Meshers: Gmsh, Netgen, CGNS, ... 19 August 16, 2011 04:14
Can anybody tell me what does fluent do using MESH MOTION? enry FLUENT 0 October 6, 2010 12:54
Can Fluent handle a degenerate block? Error while reading mesh... Anorky FLUENT 1 May 1, 2010 12:47


All times are GMT -4. The time now is 06:17.