CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [ICEM] ICEM blocking for AUTODYN (http://www.cfd-online.com/Forums/ansys-meshing/97403-icem-blocking-autodyn.html)

valahian1 February 16, 2012 07:54

ICEM blocking for AUTODYN
 
1 Attachment(s)
Hi,

I am new in ANSYS and I need to simulate an explosion in AUTODYN. I made the geometry in ICEM, applied repair geometry (topology create), I created Parts and blocks, I associated curves to edges, moved the points to geometry, created pre-mesh and converted to unstructured. I saved the project. Then, when I try to load the .blk file in AUTODYN with Fill block, it sais << Imput file format not consistent >>.
I made all of these reading some tutorials. I can't find an explanation in ANSYS Help.
What I'm doing wrong? Or I must do additonal actions? I'm in air, so please help me.


All times are GMT -4. The time now is 21:46.