CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [GAMBIT] Created Groups from Gambit are not written to the .neu file (http://www.cfd-online.com/Forums/ansys-meshing/97468-created-groups-gambit-not-written-neu-file.html)

tsero February 17, 2012 14:12

Created Groups from Gambit are not written to the .neu file
 
I have created my geometry in Gambit, which is composed by 2 kinds of materials. Therefore I want to creat 2 separate groups. Although I sucessfully create the groups and mesh them, when I try to Export the mesh in .neu (polyflow) format there is only 1 group created (which is actually the whole geometry, as if I had not created any groups in the first place.)

Any ideas?

-mAx- February 21, 2012 06:56

group is only for gambit.
In your case you need to affect your groups a special material. Then go in specify continuum types and affect right material for both groups
http://my.fit.edu/itresources/manual...zone_cont_type


All times are GMT -4. The time now is 15:43.