 |
 |
 |
|
|
|
[Sponsors] | ||||
[ANSYS Meshing] blocking 2D planar, problem associate edge to curve |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 20, 2012, 10:20
|
blocking 2D planar, problem associate edge to curve
|
#1 |
|
Member
hadrien calmet
Join Date: Nov 2011
Posts: 34
Rep Power: 14  |
Hello Everybody
I am trying to mesh a simple surface with blocking 2D planar, but one of the edge don't want to be associated to a curve. The problem is quite trivial but I can't succeed to do it. If someone can help me. Thank you I send some pictures ! |
|
|
|
|
|
February 20, 2012, 11:11
|
|
#2 |
|
Member
Fabian E.
Join Date: Nov 2009
Posts: 38
Rep Power: 16 |
One edge is not associated correctly. Don't you notice the green arrow to one point instead to curve?
|
|
|
|
|
|
|
February 20, 2012, 11:21
|
|
#3 |
|
Member
hadrien calmet
Join Date: Nov 2011
Posts: 34
Rep Power: 14 |
yes of course I notice !
this is the title of the post the problem is that I don't understand why Ansys don't want associate the edge to the curve. Perhaps because one of the curve is parametric ? I don't know . Is someone understand why. But thank you Galad |
|
|
|
|
|
|
February 21, 2012, 10:58
|
thank Far
|
#5 |
|
Member
hadrien calmet
Join Date: Nov 2011
Posts: 34
Rep Power: 14 |
thank Far
http://dl.dropbox.com/u/3423073/far.gz |
|
|
|
|
|
|
February 21, 2012, 11:07
|
|
#6 |
|
Member
hadrien calmet
Join Date: Nov 2011
Posts: 34
Rep Power: 14 |
I hope that you can download the file !
if not send me your email and I invite you to download the file with dropbox thank you and sorry |
|
|
|
|
|
|
February 21, 2012, 11:26
|
|
#7 |
|
Super Moderator
|
use this blk file (just change extension to .blk from .txt). It is the limitation of straight edge association to high curvature curve. Need to be split into more edges.
Last edited by Far; February 21, 2012 at 11:46. |
|
|
|
|
|
|
February 21, 2012, 11:43
|
|
#8 |
|
Member
hadrien calmet
Join Date: Nov 2011
Posts: 34
Rep Power: 14 |
Thank you a lot Far !
|
|
|
|
|
|
|
February 21, 2012, 11:56
|
|
#10 |
|
Member
hadrien calmet
Join Date: Nov 2011
Posts: 34
Rep Power: 14 |
Yes solved ! thank you
yesterday I cut the 2D block in 3 three parts but in 4 parts it is better ! but It is strange that ansys is not capable to associate well this edge with this curve without splitting the edge. In any case thank you |
|
|
|
|
|
|
February 21, 2012, 12:37
|
|
#11 |
|
Member
hadrien calmet
Join Date: Nov 2011
Posts: 34
Rep Power: 14 |
To follow with this problem, I trying to mesh a surface boat with the bottom structured and the rest unstructured. This is the reason of this post.
I want to do the same mesh than the picture but with the boat, mixing structured with unstructured. I use in volume mesh the octree method and existing mesh part I put the tin and the blk in dropbox. http://dl.dropbox.com/u/3423073/casco.blk http://dl.dropbox.com/u/3423073/casco.tin I am not capable to mesh it ! I do it for the appendices but for the boat , this is not working. Is you have a solution Far, you will be great ! Thank you in advance |
|
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [ICEM] Blocking and Symmetry | BrolY | ANSYS Meshing & Geometry | 32 | August 24, 2012 03:13 |
| Through-Flow solver, Leading-Trailing edge problem | Menander | Main CFD Forum | 0 | May 14, 2008 18:14 |
| solid edge problem....can you help? | cindy | Main CFD Forum | 3 | April 5, 2004 13:43 |
| CFX4.3 -build analysis form | Chie Min | CFX | 5 | July 12, 2001 23:19 |
| trailing edge problem | Kuo Wei-Jen | Main CFD Forum | 2 | April 14, 1999 10:09 |
Linear Mode
