[ANSYS Meshing] Mixing structured with unstructed mesh -- CFD Online Discussion Forums

February 22, 2012, 05:17

Mixing structured with unstructed mesh

hadrien51

Member

hadrien calmet

Join Date: Nov 2011

Posts: 34

Rep Power: 14

Hello everybody

I trying to mesh a surface boat with the bottom structured and the rest unstructured.
Check this post:
http://www.cfd-online.com/Forums/ans...tml#post345599

I want to do the same mesh than the picture but with the boat, mixing structured with unstructured. I use in volume mesh the octree method and existing mesh part (for including the structured mesh)
I put the tin and the blk in dropbox.

http://dl.dropbox.com/u/3423073/casco.blk
http://dl.dropbox.com/u/3423073/casco.tin

I am not capable to mesh it ! I do it for the appendices (picture) but for the boat , this is not working, perhaps about the topology or faceted surfaces of the boat.

If you have a solution or advice.
Thank you in advance

Attached Images

mesh.jpg (96.6 KB, 19 views)

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] SnappyHexMesh for internal Flow	vishwa	OpenFOAM Meshing & Mesh Conversion	24	June 27, 2016 08:54
[ICEM] Generating Mesh for STL Car in Windtunnel Simulation	tommymoose	ANSYS Meshing & Geometry	48	April 15, 2013 04:24
[Gmsh] 2D Mesh Generation Tutorial for GMSH	aeroslacker	OpenFOAM Meshing & Mesh Conversion	12	January 19, 2012 03:52
[ICEM] Unstructure Meshing Around Imported Plot3D Structured Mesh ICEM	kawamatt2	ANSYS Meshing & Geometry	17	December 20, 2011 11:45
Structured Grid Definition	craig shores	Main CFD Forum	3	March 21, 2001 14:48

All times are GMT -4. The time now is 06:32.