|
[Sponsors] |
[ANSYS Meshing] Meshing a Periodic channel with high curvature 2D airfoil |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 22, 2012, 02:00 |
Meshing a Periodic channel with high curvature 2D airfoil
|
#1 |
New Member
Ian
Join Date: Feb 2012
Posts: 6
Rep Power: 14 |
I'm trying to mesh a 2D airfoil which represents a turbine blade by using this periodic channel that I saw in another thread. My mesh is shown in the attached picture.
I've made my own mesh that looks similar but when I turn it into an unstructured mesh I get a lot of errors saying periodic nodes do not have twins and I have a single edge problem around the perimeter of the mesh. Also attached is the picture of the problems I get when checking the mesh. Any help with why my mesh might have this error would help. Thanks. |
|
February 22, 2012, 02:01 |
|
#2 |
New Member
Ian
Join Date: Feb 2012
Posts: 6
Rep Power: 14 |
Here is the message I get when checking the mesh
|
|
February 22, 2012, 09:16 |
|
#4 |
New Member
Ian
Join Date: Feb 2012
Posts: 6
Rep Power: 14 |
The grid isn't being accepted into fluent. When I try to read the mesh I get the error "Build Grid: Aborted due to critical error"
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Multi-element airfoil meshing | jose antonio | ANSYS Meshing & Geometry | 2 | June 28, 2011 06:25 |
[mesh tool] meshing airfoil naca 0015 | peter pan | ANSYS Meshing & Geometry | 0 | June 15, 2011 10:26 |
Oscillating Airfoil - Dynamic meshing or user-defined velocity profile. | DarrenC | Main CFD Forum | 5 | July 19, 2010 23:33 |
Airfoil simulation in High Angles of Attack | Yasser Nabavi | FLUENT | 0 | April 21, 2006 18:28 |
Multicomponent fluid | Andrea | CFX | 2 | October 11, 2004 06:12 |