CFD Online Discussion Forums
(
https://www.cfd-online.com/Forums/
)
-
ANSYS Meshing & Geometry
(
https://www.cfd-online.com/Forums/ansys-meshing/
)
- - [DesignModeler]
Coordinate System
(
https://www.cfd-online.com/Forums/ansys-meshing/98154-coordinate-system.html
)
computermonster
March 4, 2012 14:11
Coordinate System
How can I set global coordinate system to cylindrical [instead of cartesian] in
the DesignModeler of ANSYS 13 Release?
All times are GMT -4. The time now is
04:00
.