CFD Online Discussion Forums

CFD Online Discussion Forums (http://www.cfd-online.com/Forums/)
-   ANSYS Meshing & Geometry (http://www.cfd-online.com/Forums/ansys-meshing/)
-   -   [DesignModeler] Workbench problem with geometry and mesh files (http://www.cfd-online.com/Forums/ansys-meshing/98595-workbench-problem-geometry-mesh-files.html)

jwillie2000 March 14, 2012 11:56

Workbench problem with geometry and mesh files
 
Hi All,

I am using ansys workbench 13 on windows and when i do the geometry and the mesh and move on to do the setup for the CFD in Fluent, the geometry and mesh files just go missing from the folder. It has happened twice now and i am wondering why. For the first few days i used the software this did not happen. But now it seems to be repeating itself. Just wanted to know if anyone had had a similar problem in the past.

Thanks in advance!

Jimmy

Touré March 20, 2012 01:57

It's very strange. Duplicate your project before you do your setup or just re-install your software.

moloykb February 11, 2013 07:36

Quote:

Originally Posted by jwillie2000 (Post 349448)
Hi All,

I am using ansys workbench 13 on windows and when i do the geometry and the mesh and move on to do the setup for the CFD in Fluent, the geometry and mesh files just go missing from the folder. It has happened twice now and i am wondering why. For the first few days i used the software this did not happen. But now it seems to be repeating itself. Just wanted to know if anyone had had a similar problem in the past.

Thanks in advance!

Jimmy

have u got any solution. Presently I am also facing the same problem in Ansys 14.5

diamondx February 11, 2013 11:52

until you find a fix to your problem have you try export from ansys meshing ?? get a independent mesh files that you store in desktop and open an independent fluent...


All times are GMT -4. The time now is 13:53.