propller domain meshing
 

here is my model meshing and my setting for mesh:
http://www.2shared.com/file/EKzK--6U...ject_pics.html
the places near rotating domain has bad coarse meshes that it need to fine for better results but i don't know how do it.
is there anyone to help me please?

Hi Sohrab,

I asked you to use sizing option but you havent used it it seems.
Give Edge sizing in duct, rotating domain and Propeller starting with element size of 3mm and see how the mesh turn out to be. IF you are not happy with mesh then reduce element size.
Right click on "Mesh" then Insert Sizing. Select body/face/edge where you want sizing and then give appropriate element Size
Use body sizing and Edge sizing on your model.
Use inflation as well in each body in your part.

Can I suggest you to go thru tutorials first before going ahead?
It will help you how meshing works.

Cheers
KAPI

can i have the training material also please? darthsaio@gmail.com

Yes I need if it is possible
sifetistikamet@gmail.com

Hi Saio23 and Sifet,

I have sent you the training material for design modeler and Meshing both.
Please check your email.

Anyone else interested then let me know

Cheers
KAPI

can you please send it to me also .my email id is mishramanish1988@gmail.com

Thank you Kapi for the material. Do you also have material for ICEM ?

Thanks
 

Best wishes

msm6166 - > Emailed you!
saio23 - > Emailed you
sifet - > Thanks

Could you send it to me ? my email is hotboya2008@gmail.com Thank you very much!

Thank you very much Kapi

Could someone also please send me the material? Email is colin.donaldson1@ntlworld.com

ahmed.adel2022@gmail.com
Thanks in advance

emailed everyone above!

Cam u pls send me the tutorials on gharatkunal123@gmail.com

hello.
may you send for me these files?
mortazavinia@gmail.com
thanks,

Please specify which tutorial are you after? DM/Mesh/CFX/Fluent?

I want to simulate flow induced vibration of a hydrofoil in CFX and ansys. You as a senior member, definitely know some documentsétutorials useful for me. :-)

emailed you both Mortazavi and Chicklets@g

Thanx a lot Mak